Keep your throttle and clutch action light and crisp. The Motion Pro Cable Luber V3 seals tightly around 4–8 mm cable housings to drive aerosol lubricant through the cable, flushing dirt and debris with minimal mess. Simple to use, easy to clean, and built for the shop or track.

Overview
If your throttle feels gritty or your clutch is dragging, regular cable service makes a huge difference. The Motion Pro Cable Luber V3 is the newest, easiest-to-use version of Motion Pro’s proven tool. Its gasketed body seals around the cable housing so your aerosol lube actually goes into the cable—not all over your bench.

Features

• Tight-sealing design surrounds the cable housing to contain lubricant

• Works on most control cables with 4–8 mm OD housings

• Seals over free-spinning end fittings for better compatibility

• Adjustable plunger improves lube delivery and reduces waste

• Compatible with aerosol lubricants (use straw); dial indicators not required

• Easy to use and clean; compact for toolbox or track bag

• Durable construction; patent pending

Benefits

• Restores smooth, low-effort throttle and clutch feel

• Flushes out grit and moisture that wear cables prematurely

• Uses less lube with far less mess versus open-air spraying

Fitment / Use

• For motorcycle throttle, clutch, and other control cables with 4–8 mm OD housings

• Works across most street, dirt, ADV, and mini bikes that use cable controls

• Not for hydraulic lines; verify your cable’s OD and end fitting style

Specs

• Model: Motion Pro Cable Luber V3

• Cable housing range: 4–8 mm OD

• Interface: Aerosol straw (use with your preferred cable lubricant)

• Status: Patent pending

How to Use (Quick Guide)

1. Remove the cable from the perch/throttle housing as needed.

2. Clamp the V3 around the cable end so the gasket seals the housing.

3. Insert the aerosol straw into the tool and snug the plunger.

4. Spray short bursts until clean lube exits the opposite end.

5. Wipe excess, reassemble, and verify smooth operation and free play.
   Tip: Motion Pro Cable Lube is recommended (sold separately).

In the Box

• Motion Pro Cable Luber V3 (tool only; lubricant not included)

FAQs

Will this work on my dirt bike throttle and clutch cables?
Yes—if the cable housing is 4–8 mm OD, the V3 will clamp and seal properly.

Do I need Motion Pro brand lubricant?
It’s recommended but not required. Use any quality aerosol cable lubricant with a straw.

What makes the V3 better than older versions?
A tighter seal with integrated gaskets, compatibility with free-spinning end fittings, and an adjustable plunger for more efficient lube flow.

Will this reduce the mess compared to spraying directly?
Yes—the sealed design helps send more lube through the cable and less onto your bench.

How often should I lube my cables?
Intervals vary by riding conditions; many riders service cables every few months, or after wet/muddy rides, to keep action smooth and extend cable life

In a hurry to get your order? Not a problem at all here at Moto Life! After three to five business days, you should get your order. Please refer to our shipping page if you have any more questions or issues about shipment.

Want to return a product you received? Sure thing! Moto Life now makes it simpler than ever to return your purchase. Within 30 days after delivery, you can return any item for a full refund. For further details regarding returns, please see our returns page.